Programming The Remote To Control Other Devices; Customizing The Power Button; Resyncing Your Cable/Satellite Box And Tv - Bose Solo 15 Notice D'utilisation

Programming the remote to control other devices

Using the appropriate source button and device code, follow the same procedure in
"Programming your remote to control your TV" on page 22.

Customizing the power button

You can customize the power button
Solo 15 system, TV and cable/satellite box simultaneously.
1. Program your remote to control your TV and cable/satellite box (see page 22).
2. Press
Both buttons flash three times.

Resyncing your cable/satellite box and TV

After customizing the power button, your cable/satellite box and TV may become out
of sync and not power on/off simultaneously. Use the following steps to resync your
system.
1. Press the source button for the device that is out of sync.
2. Press
3. Press .
Your devices power on or off simultaneously.
and simultaneously and hold for ten seconds.
to power on or off the source.
on your remote to power on/off your
Operation
English - 23