Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
en
Getting to know your
appliance
Please fold out the illustrated last page.
These operating instructions refer
to several models.
The features of the models may vary.
The diagrams may differ.
Fig. 1
1-5
Controls
6
Freezer shelf
7
Freezer drawer
Controls
Fig. 2
* Not all models.
1
Temperature controller
Is used to set the freezer
compartment temperature.
2
On/Off button
Serves to switch the whole
appliance on and off.
3
"Super" button (freezer
compartment)
Switches super freezing
on and off.
4
Alarm display
Lights up if the freezer
compartment becomes too warm.
It goes out when the freezer
compartment has reached the set
temperature.
5*
Alarm button
Used to switch off the warning
signal, see chapter "Warning
signal".
20
Switching
the appliance on
Fig. 2
Press the On/Off button 2, the button is
lit. The temperature alarm is switched off
by pressing the alarm button 5.
The alarm display 4 lights up until
the appliance has reached the set
temperatures.
Operating tips
The sides of the housing are
■
sometimes heated slightly. This
prevents condensation in the area of
the door seal.
If you cannot open the freezer
■
compartment door immediately after
closing it, wait 2–3 minutes until
the partial vacuum has equalised.
The refrigeration system may cause
■
several areas of the freezer shelves to
frost quickly. This does not affect
function or power consumption. The
appliance does not require defrosting
until the entire surface of the freezer
shelf is covered with more than 5 mm
of frost or ice.
Setting
the temperature
Fig. 2
Set the temperature controller 1 to
a number with a coin. The higher
the number, the lower the temperature.
We recommend the medium setting.
Publicité
Table des Matières
