Warranty - Baier BSM 2868 Traduction Du Mode D'emploi Original

9

Warranty

The power tools placed on the market and distribut-
ed by Maschinenfabrik OTTO BAIER GmbH take into
account the regulations of the laws concerning engi-
neering tools and equipment to protect against risks
to health and safety.
We guarantee the perfect quality of our products and
accept the costs of subsequent repairs by replacing
the damaged parts or replacement with a new tool in
case of design, material and/or manufacturing errors
within the warranty period. The warranty period for
commercial use is 12 months.
The following are prerequisite for a warranty claim
due to design, material and/or manufacturing errors:
1. Proof of purchase and compliance with the
instruction manual
A mechanically produced original copy of a pur-
chase voucher must always be submitted in order
to make a warranty claim. It must contain the
complete address, date of purchase and type
designation of the product.
The instruction manual for the respective
machine and the safety instructions must have
been complied with.
Damage due to faulty operation cannot be recog-
nised as a warranty claim.
2. Correct deployment of the machine
Maschinenfabrik OTTO BAIER GmbH's products
are developed and produced for specific
purposes.
A warranty claim cannot be acknowledged in the
event of failure to comply with the intended use
in accordance with the instruction manual, mis-
use or use for another purpose or use of unsuit-
able accessories. The warranty does not apply if
the machine is deployed in continuous and piece-
work operation or for rental and hire purposes.
3. Compliance with servicing intervals
Regular servicing by us or a servicing and repair
firm authorised by us is prerequisite for warranty
claims. Servicing is specified for when the carbon
brushes are worn, however at least once a year.
The machine must be cleaned in accordance
with the provisions of the instruction manual. All
warranty entitlements expire in case of interven-
tion/tampering with the machine by third parties
(opening the machine).
Servicing and cleaning work are not generally
covered by the warranty.
4. Use of original BAIER spare parts
Ensure that original BAIER spare parts and
BAIER accessories only are used. They are avail-
able from authorised dealers. The type and quan-
tity of grease are to be used according to the
valid grease list. Use of non-original parts can
cause consequential damage to the machine and
an increased risk of accidents. Dismantled, part-
ly dismantled machines and machines repaired
with third party spare parts are excluded from the
warranty.
5. Wearing parts
Certain components are subject to use-induced
wear or normal wear and tear caused by use of
the respective power tool. These components
include, among other things, carbon brushes,
ball bearings, switches, power cords, seals, shaft
sealing rings. Wearing parts are not covered by
the warranty.
| 25 |