Sony HVL-F36AM Mode D'emploi page 31

Photography with wireless flash
1
Attach the flash to the camera and turn the power of
the flash and camera on.
2
Set the camera to wireless flash.
• The setting method differs depending on the camera used. For
details, see the operating instructions of your camera.
• When the camera is set to wireless the flash is also set to wireless
automatically, and WL is displayed on the control panel.
• The channel 1 "CH1" lamp for the wireless flash comes on. When
channel 2 is selected, the "CH2" lamp is lit. For details on changing
the channel settings, see page 33.
Continued on the next page
31