Cleaning - Kompernass UK 8 A1 Mode D'emploi

♦ Connect the low voltage plug
low voltage socket
♦ Connect the mains adapter
earthed mains socket. The green operating light of the mains
adapter
♦ Switch on the display device and select the correct channel to
receive a signal.
♦ Afterwards, align the camera so that the required fi eld of vision
GB
can be monitored (See chapter "Setting the camera position").
NOTE
► The IR LEDs
The light from the IR LEDs
human eye. Please note that night-time pictures will not be in
colour but in black and white.

Cleaning

CAUTION
► Disconnect the device from the mains and all connections before
cleaning. Ensure that no moisture can penetrate the device
during cleaning.
■ Clean the camera occasionally to remove dust and dirt, especially
the front lens. Use a clean, soft, dry cloth to do this. Do not rub
too hard otherwise you may leave slight scratches on the front
lens which can adversely aff ect the picture quality.
44
of the extension cable
lights up.
are automatically activated when it gets dark.
of the mains adapter
to a correctly-installed and
is, however, not visible to the
to the
.
UK 8 A1