Led Screen; Bluetooth Setting; Rca Mode; Usb Mode - CONTINENTAL EDISON CETB100BV2 Guide D'utilisation

Bluetooth mode
i)
➢ Turn on the speaker and then switch to Bluetooth Mode, the Bluetooth icon on the LED
display will keep flashing
➢ Keep the speaker and Bluetooth enabled device within 20~30 feet or less of each other
during paring process. Different environments may affect the transmission distance;
➢ Set your mobile phone or the Bluetooth enabled device to search for Bluetooth devices;
➢ When the Bluetooth enabled finds the speaker, select "CETB100BV2" from the list of found
devices;
➢ If required, enter the password "0000". Select OK or YES to pair the two units;
➢ After a successful pairing, the Bluetooth icon on LED display will stop blinking

RCA MODE

j)
➢ Keep the unit powered on. Plug one end of the audio cable to the headphone jack on your device;
➢ Plug the other end of the audio cable into the RCA jack on the speaker;
➢ It successfully joins into the RCA Mode along with RCA icon lights up;
➢ Use the connected device's audio controls for music playback.

USB MODE

k)
The speaker is able to read lossless audio if audio files MP3/WMA/WAV/APE/FLAC formats
are in USB disk.
➢ Turn on the unit. Push USB disk with music files into USB port at the rear panel of speaker, it
will switch to USB Playback Mode and then start to play music automatically.

Automatic standby

l)
Due to the European legislation, your Bluetooth tower respect the standby statute
imposed by the ERP directive (Energy Related Products).
If Bluetooth tower remains idle (no signal input) for about 15 min, it will shut down automatically.
During normal use of the Bluetooth tower, make sure to set the amount of volume from Bluetooth
tower and external devices (such as DVD, TV, or mobile phone) at normal volume, if the volumes
in Bluetooth tower or external devices are indeed low, the Bluetooth tower may not detect the
input signal and it will power off automatically.
37