Technical Data; What To Do If - Becker Centronic VarioControl VC180 Notice De Montage Et D'utilisation

Rated voltage
Switching current
Degree of protection
Class of protection
(when properly installed)
Permissible ambient temperature
Radio frequency
Dimensions
Current consumption
Problem
LED on VC180 does
not light up when
transmitter is acti-
vated.
Consumer does not
respond to transmit-
ter.

Technical data

What to do if...?

Cause
1. Batteries in transmitter
are dead.
2. Transmitter is not pro-
grammed.
3. No power to the sock-
et.
4. VC180 is out of range.
Consumer is switched off. Switch on consumer.
2300240 V AC / 50 Hz
10 A /2300240 V AC
at cos ϕ =1
IP 20
II
0°C to +55°C
868.3 MHz
approx. 110 x 60 x 40 mm
< 1 W
Solution
1. Insert new batteries
correctly.
2. Programme
ter.
3. Check fuse.
4. Reduce distance from
VC180.
de
en
transmit-
fr
nl
19