General; Warranty - Becker Centronic VarioControl VC180 Notice De Montage Et D'utilisation

Assembly and Operating Instructions

General

The VC180, as supplied ex works, converts radio signals into control signals.
Devices that are ready to plug in with an earthed or Euro plug can be radio-
controlled with the VC180. The VC180 can be controlled with all hand-held and
wall transmitters in the Centronic range of control units.

Warranty

Structural modifications and incorrect installation which are not in accord-
ance with these and our other instructions can result in serious injuries, e.g.
crushing of limbs. Therefore, structural modifications may only be carried
out with our prior approval and strictly in accordance with our instructions,
particularly the information contained in these Assembly and Operating
Instructions.
Any further processing of the products which does not comply with their
intended use is not permitted.
The end product manufacturer and fitter have to ensure that all the current
statutory, official and, in particular, EMC regulations are adhered to during
utilisation of our products, especially with regard to end product manufacture,
installation and customer advice.
12