Publicité
Les langues disponibles
Les langues disponibles
Mounting the cup wheel
Dust extraction
Dust from materials like lead paints, some wood types
and metals may be hazardous to your health. Skin
contact or inhalation of that dust may result in allergic
reactions and/or respiratory illness of the operator or
other personnel in the vicinity.
Specific types of dust (e.g. oak or beech wood) are
carcinogenic, specifically in conjunction with additives
for wood treatment (chromate, wood preservative).
Materials containing asbestos must only be processed
by specialists.
Always use a dust extractor when processing mineral
substances (filter class "M").
For best results, use the recommended Collomix high-
performance dust extractor with this power tool. This
extractor with filter class "M" is certified for the ex-
traction of fine particulate.
Ensure sufficient ventilation of the work area.
The use of a respiratory protection mask with filter
class P2 is recommended.
Connection:
Create an air-tight connection between the extraction
hose of the extractor with Ø 35 mm and the extractor
connector on the protective hood.
Comply with the following instructions when work-
ing with the dust extractor:
Only work with the product combination of power
tool and specified diamond cup disk recommended
by Collomix, and the Collomix extractor of class "M".
This will guarantee optimised dust extraction and
work process.
Read the separate operating manual for the extractor,
and take particular note of the cleaning, maintenance
and filter replacement instructions.
6
Ensure to empty the dust extractor regularly. Use the
stipulated plastic dust bags to prevent the dust from
entering the environment.
Always wear hearing protection, protective goggles,
dust mask and protective gloves while working.
7
Pivotable main handle
8
Only work with the main handle (13) engaged.
See page 2.
► Push in the button (9).
► The main handle (13) can now be turned 90° to
► Make sure that it is securely positioned: the main
handle (13) must be engaged and it should not
be possible to move it.
Operation
data provided on the type plate must match the volt-
age of the power source. 230 V devices can be oper-
ated with 220 V or 240 V power sources.
Switching ON/ OFF
wards the workpiece.
tool off when the plug is removed from the mains
socket or if there has been a power cut.
ues running if it is forced out of your hands. There-
fore, always hold the machine with both hands using
the handles provided, stand securely and concen-
trate.
After switching off the machine, only place it down
when the motor has come to a standstill.
Temporary activation
►
►
Continuous operation (depending on features)
►
Rev. 3 / 14
both sides and can be engaged.
Note mains voltage specification! The voltage
Always guide the machine with both hands.
Switch on first, then guide the accessory to-
Avoid inadvertent starts: always switch the
In continuous operation, the machine contin-
Switching on: Slide the lock (10) in the direction
of the arrow and press the trigger switch (11).
Switching off: Release the trigger switch (11)
Switching on: Slide the lock (10) in the direction
of the arrow, press the trigger switch (11) and
keep it pressed. The machine is now switched
on. Now slide the lock (10) in the direction of the
arrow once more to lock the trigger switch (11)
(continuous operation).
Publicité
