Connectors; System Connections - ADVANCED NATIVE TECHNOLOGIES ANTMIX 16fx usb Notice D'emploi

SERIES

6 | CONNECTORS

A BALANCED XLR-M MICROPHONE INPUT- MONO AND MONO/STEREO CHANNELS
1 - ground
2 - positive (or hot)
3 - negative (or cold)
B TS JACK
DFX SEND - Master section
STEREO RETURN - Master section
CONTROL ROOM - Master section
DFX MUTE - Master section
MAIN MIX OUT
GR1, GR2, GR3 and GR4 OUT
AUX1, AUX2, AUX3 and DFX SEND
C TRS JACK Line input - all channels
D BALANCED XLR-F MAIN MIX OUT
1 - ground
2 - positive (or hot)
3 - negative (or cold)
E TRS JACK
Insert - mono channels
F RCA PLUG
2 TRACK IN - Master section
2 TRACK OUT - Master section
G STEREO JACK
Phones - Master section
ANTMIX Series
16 User manual |
3
1
2
GND
GND
3
1
2
STEREO JACK
tip (out)
tip GND IN
OUT
ring MONO JACKS
ring (in)
OUT
IN
tip (L) GND
tip STEREO JACK
ring
ring (R)

7 | SYSTEM CONNECTIONS

Check the correct functioning of the cables and always connect the cables properly according to the type of
device and the mixer input/output.
Always use good quality cables.
FIG. A | AUX / DFX POST
• AUX sends - 1, 2 and 3
Connect this output to one or more - daisy-chained - monitors.
• DFX POST SEND
Connect to this output to an external effects unit.
Connect external effects unit outputs to STEREO RETURN inputs
L / R OUTPUTS
EXTERNAL EFFECT
INPUT
ANTMIX Series
| User manual
17