ADVANCED NATIVE TECHNOLOGIES ANTMIX 16fx usb Notice D'emploi page 5

SERIES
14 STEREO RETURNS 1-2-3-DFX
14
Master level controls for the auxiliary STEREO RETURNS:
- 1: Controls STEREO RETURN 1 level sent to the MAIN MIX output
- 2: Controls STEREO RETURN 2 level sent to the MAIN MIX output
- 3: Controls STEREO RETURN 3 level assignable, by the MAIN MIX/CRTL ROOM key,to the MAIN MIX
output or to the CONTROL ROOM outputs
- DFX: Controls DFX OUT level and the STEREO RETURN 4 assignable, by the 3 lateral keys, to
groups 1-2 (GR 1-2), groups 3-4 (GR 3-4) and MAIN MIX output. By pressing the STEREO RETURN
SOLO button (with LED), all STEREO RETURNS enter SOLO mode and their mixed signal is sent to the
CONTROL ROOM and to PHONES A-B outputs
15 AUX/DFX MASTER & SOLO
15
Controls the master levels of the respective auxiliary sends and the DFX send (internal effect).
Press the SOLO button to pre-listen sends 1-4, their signal is sent to the CTRL ROOM and PHONES A-B
outputs.
16 +48V
16 17
This LED is lit to when Phantom 48V is activated.
17 POWER ON
This LED is lit green when the mixer is ON.
18 OUTPUT LEVEL
MAIN MIX output level LED indicators. The L indicator can also work to control the level in SOLO. When
19
the CLIP LED lights up, the output signal level is too high.
19 LED LEVEL SET
20
When this LED is on, the OUTPUT LEVEL L LED bar indicates the input level of the channel in SOLO PFL
mode, level can be optimized by the GAIN control of the selected channel.
21
20 LED SOLO ACTIVE
When it's lit, one or more channels and/or one or more auxiliary aux sends are selected in SOLO mode.
21 PFL/AFL BUTTON
18
It allows the choice between two types of SOLO for the CTRL ROOM and PHONES A-B outputs.
When it is released (PFL = "pre-fader listening"), you can listen to the audio signal before the fader. This
mode is useful to check the input level of the channel in SOLO via the main LED meter, and optimizing
the gain accordingly. When it is pressed (AFL = "after-fader listening"), it is possible to hear the mixing
of channel(s) and the relevant AUX auxiliary sends placed in SOLO, keeping current levels and pans
adjustments.
ANTMIX Series
8 User manual |
22
23
22 MAIN MIX / GR 1-2 / GR 3-4 / 2 TK IN,
Press the key(s) of the signal(s) you wish to listen via the CONTROL ROOM.
24
23 PHONES
This knob controls the volume of the headphones connected to the
PHONES A-B outputs.
25
24 CTRL ROOM
This knob controls the level of the CONTROL ROOM outputs (eg pair
of studio monitors).
25 2TK LEVEL
Level control of 2TK-IN stereo input (RCA connectors) or from optional
Bluetooth
26 L & R GROUPS ROUTING TO MAIN MIX
26
Press the L and R buttons to assign the group signal to the MAIN MIX
output.
27 GROUP OUT 1-4
27
These faders independently adjust the output level of the four groups,
which can be used both as master levels for recording and to drive other
powered speakers to create distinct listening areas at different volumes.
28 MAIN MIX
28
Adjust this fader to set MAIN MIX OUTPUT level.
® cards or USB player).
ANTMIX Series
| User manual
9