Publicité
Les langues disponibles
Les langues disponibles
Temperature mode
This function is suitable for roasting meat and vegetables.
Place the pot in the middle of the cooking area.
Touch ON/OFF
one time and after that 3 times the function button
bellow the temperature symbol and in the display 180 can be seen. The cooling fan
starts to work. With the buttons
degree steps. During the cooking the temperature can be adjusted at any time. The
build in sensor keeps the temperature at about the adjusted temperature. The tem-
perature can be adjusted from 60°C up to 240°C.
When the failure code E0 is in the display then the used pot or pan is not
suitable induction cookers. The appliance beeps 9 times and after ca 30
seconds the appliance will switch to the stand-by mode.
Timer
The temperature or power must be adjusted first, as described above. Touch the func-
tion button
so many times, until the red LED bellow the Timer symbol
The display shows „0". Now there is 5 seconds time to adjust the time by pressing the
button in steps of 5 minutes. The time can be adjusted from 5 to 180min. Pressing
the
button decreases the time by 5 minutes. When the
one time the time increases or decreases by 5 minutes and a beeping noise can be
heard. When the
heard and the time can be adjusted faster.
If you want to change the time during the cooking touch the function button
until the timer LED is blinking. Now you have ca 5 seconds time to change
the timer setting.
When the function temperature and the timer is used and it is the intention to switch
to the power mode, then the Timer is not deleted.
When the ON/OFF button
deleted and the appliances switches to the stand-by mode.
If the adjusted time runs out, the appliance will switch to the stand-by mode.
Residual heat „H"
When the glass plate gets hotter than ca 60°C the residual heat symbol „H" can be
seen in the display and vanishes after the glass plate cools down. When the residual
heat light „H" is on, then do not touch the cooking area. Danger of burns!!!
Please notice that the cooling fan is running during cooking to cool down the elec-
tronic inside.
To protect the electronic the cooling fan will work some minutes after the appliance
is switched off. This avoids that the appliance do not overheat and be damaged. Only
unplug the appliance after the cooling fan switched off by itself.
18
or
or
is pressed for a longer period no beeping sound can be
is touched during the cooking then the program will be
the temperature can be adjusted in 20
or
. A red LED
is blinking.
button is pressed
Publicité
