Connecting The Power; Changing The Outlet Plug - Tascam 102i Série Mode D'emploi

Connecting the power

Use the included AC adapter (PS-P1220E) to connect a power sup-
ply to the unit as shown below.
Power outlet
PS-P1220E (included)
In order to prevent the cord from becoming disconnected during
use, wrap it around the cord holder when connecting it.
ATTENTION
Always use the AC adapter (PS-P1220E) that was shipped with
the unit. Using a different AC adapter could cause malfunction,
overheating, fire or other problems.
NOTE
The AC adapter for the unit includes 4 types of outlet plugs. At-
tach the type of plug that matches the power outlet that you
are using.
10
TASCAM SERIES 102i / SERIES 208i

Changing the outlet plug

NOTE
1.
DC plug
2.
3.
This completes changing the outlet plug.
After changing the outlet plug, confirm that it is not loose or crook-
ed and that everything is normal before plugging it into an outlet.
ATTENTION
When purchased new, the included PS-P1220E AC adapter for
the unit has an outlet plug (A) already attached. There should
be no need to change the plug.
Move the knob (1) on the PS-P1220E AC adapter in the direc-
tion of the arrow and remove the plug (A).
Select the plug that matches the AC outlet from the 3 other
types included (B, C or D).
Move the knob (1) in the direction of the arrow again, and
attach the plug to the AC adapter.
Do not use the adapter if there is anything abnormal about the
plug after changing it. Use when the plug is abnormal could
cause fire or electric shock.
Contact the retailer where you purchased the unit or a TEAC ser-
vice center (on the back cover) to request repair.