LUMENE ShowPlace HD Mode D'emploi page 18

6
Connect the left end cap to the IR interface.
7
Place both end caps on both sides of the screen,
and check the available space is identical on
each side. Adjust if needed.
Note : If the end caps are not well aligned, use a clip to
disassemble them. Insert the tip of a clip in the dedicated
hole and disassemble the end cap.
available
space
• Ceiling end caps are not interchangeable. Please make sure to install them correctly.
8
Check both end caps are aligned with case and
suspended ceiling, then push firmly to clip them
on the case.
Push
horizontally
Disassemble hole
18
IR interface
Clip
UK
Clip firmly