Note: Mac computers will create and add hidden files to SD/SDHC
memory card each time the user playbacks the recorded MP4 movie
files on the Mac. The hidden or modified MP4 files stored on the
SD/SDHC memory card can no longer be played back on the Film
Scanner. A "No File" message will be displayed on the Viewer instead.
Rewind
1. Open the flap door and remove film, then close the flap door.
2. Swap reels. Place an empty reel on the right shaft and place film
perforation holes on the outside.
3. Follow the instructions on the screen.
4. Press the Enter button to Start/Stop the rewinding process.
Exposure
1. Exposure range is from 2.0 to -2.0.
2. Press Up/Down to change the value and press Enter to complete
the change selection.
3. The default setting is 0.0. Negative values provide a darker effect and
an Exposure of 2.0 gives the brightest result.
4. Adjust the required Exposure before recording.
7
0.5
0
-0.5