Connect To A Tv Set; Specifications - Reflecta Super 8-Normal 8 Mode D'emploi

Connect to a TV set

You can use your TV screen as the default screen.
1. Turn on the scanner and your TV.
2. Set TV input to A (or TV, TV) mode.
3. Connect the film scanner "TV OUT" port to your TV's Video-In port
(yellow) with the included TV-Out cable.
4. The LCD screen on the scanner will turn dark and the display will be on
your TV instead.

Specifications

Image sensor: 3.53 Megapixels (2304H x 1536V) 1/3" CMOS sensor
Display: Colour 2.4" TFT LCD
Exposure control: Auto/Manual (-2.0 to2.0)
White Balance: Auto
Resolution: 1440 x 1080 p
Playback frame rate: 20 frames per second
Film type: 8 mm and Super 8 film in 3" or 5" reel
File format: MP4 (AVC)
TV-out type: NTSC/PAL
External memory: SD/SDHC memory cards up to 32 GB (Max.)*supported
Power Supply: DC 12V
Interface: USB 2.0
Languages: English, German, French, Spanish, Italian andDutch
Dimensions: (L/W/H): 269 x 166 x 114 mm/10.6 x 6.5 x 4.5inch
Weight: 1410 g/3.1 lb
Note:
*Each 50 ft film takes about 125 MB of memory and about 30 minutes to
record.
9