Separate Placement Of The Satellites - Conrad 1047016 Notice D'emploi

a) Separate Placement of the Satellites
The satellites can be mounted on the wall with the enclosed wall holders or set upon standards with a 0.95 cm (3/8")
thread. This placement is intended for stereo operation.
Wall mounting
• Mount the satellites to the wall with the wall holders as shown in the figure.
• Use sufficiently sized and suitable attachment materials for attachment of the wall holders.
Stand assembly
• Install the satellites with the threaded sockets on a suitable stand with a 0.95 cm (3/8")-thread.
• A satellite can also be installed on the subwoofer with a M20-spacer rod and a reducing flange (procedure according
shared assembly on a spacer rod, see next section).
• Here, the end with the M20-thread is screwed into the subwoofer's threaded flange and the satellite is attached to
the other end of the spacer rod with the reducing flange.
28