Rittal 7979.110 Série Notice D'installation Et D'utilisation Succincte page 15

Wire cross-section:

Depending on the PDU version, ensure the following pre-fuse:
PDU basic:

Lay the connection cable from the PDU out of the IT rack and connect it to the supply.

Connect a connection cable from the Rittal accessories to a spare outlet socket on the PDU and to
the equipment.

Depending on the PDU version, unused slots can be closed using the C13/C19 covers from the avail-
able accessories (7955.010 and 7955.015).
If installation is not successful: see section 1.1.
6 Service
For technical questions, please contact:
Tel.: +49(0)2772 505-9052
E-mail: info@rittal.de
Homepage: www.rittal.com
For complaints and service requests, please contact:
Tel.: +49(0)2772 505-1855
E-mail: service@rittal.de
Rittal Power distribution unit PDU basic
2.5 mm² (16 A versions), 4.0 mm² (32 A versions)
3 x 16 A (16 A versions) or 3 x 32 A (32 A versions)
Service, Installation and operation
EN
15