Publicité
EN
Safety instruction
for installation and operation
Installation and usage
Make sure that the installation location is frost-
proof and not prone to flooding.
The connections must be protected from construc-
tion dust.
The loop pipe must be dimensioned in such a way
that a downstream draw-off ensures a turbulent
water exchange.
Before installation is completed,
a leak test must be carried out.
Priority must be given to compliance with national
standards and regulations for plumbing installation
and for accident prevention.
Local regulations on waste recycling and disposal
must be followed.
Usage
The KHS Flow-Splitter prevents stagnation in the
connected loop pipe.
The operating principle of the KHS Flow-Splitter
means that the water content of the connected
loop pipe can be exchanged through downstream
draw-off (e.g. natural draw-off, automatic flushing
measures) or a circuit circulation.
The product may only be used for this purpose.
Any other uses constitute misuse.
The valve should only be used
- in perfect condition
- as intended
Important information
for the plant operating organisation
Medium: Water
Max. operating temperature: 90 °C
Pressure rating: PN 16
!
Safety instructions
Be sure to read and follow the safety instructions
in this manual. Failure to observe the warnings may
lead to injury or material damage!
The following safety instructions are used in this
manual:
Warning!
Indicates hazards that may result in injury,
damage to property or contamination of
drinking water.
Note!
Indicates hazards that may result in
system damage or malfunctions.
Other symbols in this manual:
Inspection in accordance with EN 806-5
5 / 32 – K410065000002-00 / 01.2021 – © www.kemper-olpe.de
Publicité
