Ayce 5611 Traduction De La Notice Originale page 78

Always push the forward / reverse rotation control as far as it will go! Do not use the
product with the control switch in an intermediate position!
NOTE: If you are using the product for the first time after changing the rotational
direction, a locking sound may be heard. This is normal and does not represent a
defect.
ON/OFF switch (Fig. 5)
Fig. 5
LED work light (Fig. 6)
Fig. 6
3. Operation for working
a. General operation
1. Check the product and charger as well as accessories for damage before each
use. Do not use the product if it is damaged or shows wear.
2. Double check that accessories or application tools are properly fixed.
3. Always hold the product by its handle. Keep the handle dry to ensure safe
support.
1. Switch the product on by pressing
the on/off switch.
2. Switch the product off by releasing
the on/off switch.
LED work light will automatically
illuminate when you turn the tool ON.
!
Do not look directly into
LED light.
WARNING