Publicité
Les langues disponibles
Les langues disponibles
Choose the driver bits (Fig. 3)
1. Pull the loading cover as far back as possible.
2. Turn the wheel to choose the right driver bit as desired (can be seen from
viewing window).
3. Push the loading cover forward.
Fig. 3
Forward/reverse rotation control (Fig. 4)
Change the rotational direction from forward to reverse by pressing the forward /
reverse control.
Fig. 4
!
Only change the rotational direction when the product is switched off
and has come to a complete stop! Always ensure that the forward /
reverse rotation control is adjusted to the correct position depending
on the intended operation!
WARNING
1. Move the forward / reverse rotation
control to the left in order to use the
product in a clockwise rotational mode.
Use this function for screw driving.
2. Move the forward / reverse rotation
control to the right in order to use the
product in counter clockwise rotational
mode. Use this function to loosen jammed
screws.
3. Move the forward / reverse rotation
control to the centre position to lock the on/
off switch and avoid accidental starting.
76 | 77
GB
Publicité
