Operation
4.1.2 Climate Screens
The Climate screens allow you to control and monitor the
climate within your RV, such as cooling, heating, and air
circulation.
2 Climate Screens
6
From these screens, you can manually control or monitor
the following functions:
• Current Temperatures: These indicate the current
indoor and outdoor air temperatures. The Inside and
Outside temperature values will display "- - " if the air
temperature is outside of the sensor detection range
[< -100 or > 200 °F (< -73 or > 93 °C )].
The outdoor temperature sensor may not be
I
available on all models.
• Power: The default state for this button is off. Tap the
toggle button once to turn climate control on. The
applicable climate control appliance will be activated,
depending on the set temperature and the
temperature type currently selected.
• Set Temperature: This area displays a set of numbers
ranging from 40–90 °F (4–32 °C) in ascending order.
Use the tumbler to select your desired temperature
setting.
• Climate Mode: There are four climate mode options:
Auto, Fan Only, Heat, and Cool. Tap the center bar of
the lower section indicator to view the climate mode
settings. Use the tumbler to select your desired mode.
During the compressor wait period, a moving
snowflake or heat wave icon will appear under the
outside temperature readings to show that the
compressor is waiting to heat or cool.
– Choose Auto to allow the system to select the
appropriate operating mode based on the
configured settings and actual temperature
readings.
– Choose Fan Only to turn off the AC or furnace and
use only the fan for the AC unit.
– Choose Heat to turn on the furnace or heat pump.
– Choose Cool to turn on the AC unit.
Refer to the Settings screen for information about
I
changing the Heat Mode setting to run the
furnace, the heat pump, or in automatic mode.
• Fan Level: Tap the right bar of the lower section
indicator to view the fan speed settings for the AC unit.
There are four fan speed options: low, medium, high,
and auto.
Dometic Interact
EN