Area Measurement - geo-FENNEL GeoDist 30 Mode D'emploi

EN
MEASURING
When measuring in bright sunshine or to a reflective surface, it is
recommended to use a target plate.
MEASURING A SINGLE DISTANCE
Power on the device, aim the laser point at the target
and press the measuring button (9). The measured
distance is displayed in the main measurement line (7).
When the next measurement is carried out the previous
measurement will move up into the previous measurement line.

AREA MEASUREMENT

Press button (10) briefly to access the area measurement function. Aim
the laser at the first target (i. e. length) and press the measuring button
(9) briefly. Aim the laser at the second target (i. e. width) and press the
measuring button (9) once again. The instrument will now automatically
caluclate and display the area.
19