MCS MASTER DH 772 Manuel D'utilisation Et De Maintenance page 39

BG
1... BEFORE USE
CZ
2... CONSTRUCTION
DE 3... OPERATION
4... MAINTENANCE AND SAFETY
DK
5... NOTICES ABOUT UNIT OPERATION
6... ELIMINATION DE DÉTÉRIORATIONS
EE
7... ACCESSORIES
ES
FI
THE UNIT IS SEALED AND CONTAINS FLU-
ORINATED GREENHOUSE GASES COVERED
FR
BY KYOTO PROTOCOL.
THE "GWP" IS LISTED IN THE "TECHNICAL
GB
SPECIFICATIONS TABLE".
HR
►► 1. BEFORE USE
►
HU
► dehumidifier should be transported upright
► please do not cut off the power by pulling the
IT
wire
► please do not plug or unplug to startup or
LT
shut off the unit
► please be careful when moving the unit, do
LV
not mangle the wire
NL ► please do not put fingers or sticks into the grid
► please prohibit child to climb, stand or sit on
NO
the unit
► please unplug the unit before cleaning or
PL
maintenance
RO
NOTICE: WE SUGGEST THAT ANY RE-
PAIRS SHOULD BE EXECUTED BY PRO-
RU
FESSIONAL SERVICEMEN
► please make sure the unit is grounded
SE
► please do not use unit in airproof conditions
► please follow the instructions thoroughly
SI
PRODUCT INTRODUCTION
SK
Dehumidifiers can reduce air humidity in room
and thus make people live comfortably and
UA
goods stored properly. Due to their neat appear-
ance, compact configuration, high quality and
SE
easy operation, our dehumidifiers are widely
SI used in research institutions, industry, transpor-
tation, medical centers, measuring institutions,
SK
stores, underground constructions, computer
rooms, archives, warehouses, bathrooms, etc.
Keeping apparatus, meters, computers, com-
munication equipments, drugs and files away
from moisture, eroding, and mildew.
CONTENTS
►► 2. CONSTRUCTION
►
► Dehumidifier FIG. 1
1. Handle
2. Control panel
3. Wheel
4. Water tank
5. Water tank panel
6. Filter grill
7. Hour counter
► Control panel FIG. 2
1. humidity display
2. operate indicator
3. defrost indicator
4. memory indicator
5. tank full indicator
6. memory
7. humidity up
8. humidity down
9. on/off button
►► 3. OPERATION INSTRUCTION OF
►
KEYS:
► ON/OFF: Press ON/OFF, the unit runs in a
circulation "ON-OFF-ON".
► Humidity up and down: Press "humidity up
and down" for once, the set humidity will in-
crease or decrease by 1%. Press the key for
1.5 seconds and the set value will increase or
decrease by 1%. Press continuously with the
speed 5 points per second.
► Memory Key: Press the memory key and the
memory indicator will light on to start the func-
tion of memory when the power cuts off. Press
the memory key again; the memory indicator
dies to shut off the function of memory when the
power is cut off.