Télécharger Imprimer la page

URBANGLIDE RIDE 100 MAX Notice Originale page 23

Masquer les pouces Voir aussi pour RIDE 100 MAX:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
Displays the speed at which you are travelling
1
Switching on the front light: To do this, press the button briefly once. To turn off, repeat the same operation.
2
Speed level: There are 3 speed modes (ECO/D/S), press the button twice to switch from one speed mode to another.
3
Error message
4
Battery level
5
Button On/Off
6
Unfolding steps
1.
To unfold the scooter, first put the scooter on straight and
then press the mudguard to release the hook, hold the chainring,
lift the handlebars to the stem position and close the
folding/unfolding latch.
Using the screen
Use of the button On/Off :
1. The battery indicator shows the remaining battery level in real
time.
2. To turn the scooter on, press and hold the On/Off button for 1 to 2
seconds. The same applies to turning off the scooter.
3. Once the scooter is on, press the On/Off button once to turn on
the front light. Press once more to turn it off.
4. To change the speed modes "1, 2 and 3" press the On/Off button
twice.
- Speed 1: maximum speed of 6km/h
- Speed 2: maximum speed of 15km/h
- Speed 3: maximum speed of 25km/h
5. Walk Mode: Press the On/Off button 5 times to activate this mode.
6. To change between zero start and kickstart, press the On/Off
button 6 times.
7. To change the unit between km and mph, press the On/Off button
3 times.
9

Publicité

loading