Publicité
Les langues disponibles
Les langues disponibles
A Thermal Protector has been designed into your cleaner to protect it from overheating. When the
thermal protector activates the cleaner will stop running.
If this happens proceed as follows:
1. Turn cleaner OFF and unplug it from the electrical outlet.
2. Check fullness of bag, change if needed.
3. Inspect the nozzle. exhaust, inlet and filter for any obstructions. Clear obstructions if present.
4. When cleaner is unplugged and motor cools for 30 minutes, the thermal protector will deactivate
and cleaning may continue.
If the thermal protector continues to activate after following the above steps, your cleaner
needs servicing.
Remove Disposable Bag
WARNING
!
To reduce the risk of personal injury - Unplug
before cleaning or servicing.
3.1
what To Buy
To assure cleaning effectiveness, use only Hoover
genuine HOOVER
visit www.hoover.com. HOOVER
Cord Storage
Wrap cord around cleaner for convenient storage.
Attach the plug end to the cord.
LUBRICATION
The motor is equipped with bearings that contain sufficient lubrication for their lifetime.
The addition of lubricant could cause damage. Therefore, do not add lubricant to motor.
!
!
Press down on the
bag door lock and
open door.
Grasp bag collar and
pull out bag.
®
bags to assure your cleaner operates at peak performance. To order bags please
®
bags can be identified by the trademark-
NOTICE
Replace Disposable Bag
3.2
®
Type I HEPA Bags. It is important that you use only
!
Replace with new
bag.
Slide bag collar
behind groove in
opening and push
bag into place.
Close bag door until
it locks.
Publicité
