Ferplast risto dog Manuel D'utilisation page 15

Assembly instructions
1 Make sure the electrical cord is not plugged in.
2 Mount safety covering A onto bowl holder B (see fig. 1).
3 Remove the information sticker from the dispenser opening
hole.
4 Lift the food container and place the bowl holder B on the
lower basin C (see fig. 2).
5 Fix the bowl holder B to the lower basin with the 2 screws
included in the package (see fig. 3).
Fig. 1
D
B
Fig. 3
A
C
6 Insert food bowl D onto bowl holder B (see fig. 1).
7 Use 2 1.5 Volt AA LR6 alkaline batteries inserting them
carefully to assure that the polarity is situated correctly.
Do not use rechargeable batteries.
Incorrect insertion of the batteries can cause serious
damage to the internal circuit board!
If batteries are not inserted the product will not function.
Fig. 2
B
Fig. 4
C
15
English