Publicité
PERfoRmancE accESS BomBa BP20
U s e r m a n u a l
Amplifier setting and connections
High level imputs
for compatibility
with all types of installation
Œ
Low level inputs
(4V compatible)
’
Power protection
fuse
Guide
Issue
Can't switch on the
Bomba BP20
The Bomba BP20
is on,
but no amplification
Output distorted
Fuses blown
Cause
No +12V on the supply
Ground not properly connected
Fuse broken
No signal
No remote
Level control ineffective
Source level too high
Gain of the amplifier too high
Output levels too high
Ž
Adjustable level
Adjustable low-pass crossover
‘
Adjustable subsonic
20 - 35Hz
Solution
Check connections to battery
Check connection
Change fuse with a 15A one
Check signal cable
Check power on the remote
Turn up the volume on the source
Turn down the source level
Turn down the gain of the amplifier
Turn the volume down
‘
45 - 120Hz
Phase settings
(o° / 180°)
Adjustable
bass-boost settings
0 - 12dB
Power supply
6
Publicité
