Connections; Tv Control & Operation; First Time Installation; Network Connection - Toshiba 32L3663 Mode D'emploi

Connections

Antenna
Connect the antenna cable/s to your TV.
Power
After unpacking, allow the TV set to reach the ambient
room temperature before you connect the set to the
mains. Plug the power cable to the mains socket outlet.
The TV set is designed to operate on a 220-240V
AC, 50 Hz supply.

First Time Installation

When turned on for the first time, Welcome Screen will be displayed. Select your language and press OK.
Follow the on screen instructions to set your TV and install channels. The installation wizard will guide you
through the setup process. You can perform First Time Installation anytime using the related option in the
Installation menu.

Network Connection

You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired
or wireless connection.
Wired
modem/router
Note: The figures are for representation only
satellite
dish
aerial /
cable TV
External Devices
Use the proper cable to connect two units together.
Example
Connections
To select the desired input source, press the Source
button on the remote control. Or press the switch in
consecutively until the Sources list is displayed.
PLEASE ENSURE BOTH UNITS ARE
SWITCHED OFF BEFORE CONNECTING
TV Control & Operation
The control switch allows you to control basic functions
of your TV. Press the centre of the control switch in or
the Standby button on the remote to turn the TV on
from standby mode.
Wireless
English - 4 -
wireless
modem/router