Bushnell neo 368050 Manuel De L'utilisateur page 16

Bushnell Neo
Map Course
Map Course (continued)
3. Function: Map GPS Point
To add or revise GPS data highlight "Map GPS Point"
and press OK. Select the desired hole and press
OK. Highlight point to map* and press OK. Stand at
desired location, confirm satellite strength and press
OK to register point. Do not move until process is
complete. Repeat these instructions for all desired
points. When finished, scroll to highlight "Save" and
press OK. Repeat for all holes, then select "Save/
Exit" to return to Main Menu.
*If mapping a Custom Point, the user may customize the name prior to registering GPS
data. The user may select from a list of common abbreviations, or choose a six (6)
character name, to easily identify the point on the course. If the user chooses not to
customize the name, proceed directly to "Register Point".
4. Function: Save/Exit
After all data has been entered and/or captured, the
user MUST scroll to "Save/Exit" and press OK to
save all information. All entered data will be lost if
function is exited without saving.
16
User Manual