3.3.2 Economy Mode
Purpose
Energy savings. During periods of less
frequent use (door opening) or absence
from home, such as a holiday, Eco program
can provide optimum temperature whilst
saving power.
How to Use
• Push Mode button (#3 on control panel
diagram) until Eco symbol appears.
• If no button is pressed for 1 second.
Mode will be set. Eco symbol (#6) will
blink 3 times. When mode is set, buzzer
will sound beep beep.
• Freezer temperature segments (#1) will
show "E".
• Economy symbol and E will light till mode
finishes.
During This Mode:
• Freezer may be adjusted. When
Economy mode will be cancelled, the
selected setting values will proceed.
• Super Freeze mode can be selected.
Economy mode is automatically
cancelled and the selected mode is
activated.
To cancel, you will just need to press on
Mode button.
3.3.3 Screen Saver Mode
Purpose
This mode saves energy by switching off all
control panel lighting when the panel is left
inactive.
How to Use
• Screen saver mode will be activated
automatically after 30 seconds.
• If you press any key while the lighting
of the control panel is off, the current
machine settings will reappear on the
display to let you make any change you
wish.
• If you do not cancel the screen saving
mode or press any key for 30 seconds,
control panel will remain off.
To deactivate the screen saving mode,
• To cancel the screen saving mode, first of
all, you need to press any key to activate
the keys and then press and hold
the Mode button (#3 on control panel
diagram) for 3 seconds.
• To reactivate screen saving mode, press
and hold the Mode button (#3 on control
panel diagram) for 3 seconds.
3.3.4 Freezer Temperature Settings
The initial temperature value for the freezer
setting indicator is -18°C.
• Press the set freezer button once (#5 on
control panel diagram).
• When you first push this button, the last
set value will blink on the screen.
• Whenever you press this button, a lower
temperature will be set (-16°C, -18°C,
-20°C, -22°C, -24°C, super freeze).
• When you push the set freezer button
until the super freeze symbol (#2)
appears, and if you do not push any
EN - 38