Clatronic KM 3636 Mode D'emploi page 38

WARNING: Risk of injury!
• Appliances can be used by persons with reduced physical, sen-
sory or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning use of
the appliance in a safe way and if they understand the hazards
involved.
• Do not try to repair the appliance on your own. Always contact an
authorized technician. If the supply cord is damaged, it must be re-
placed by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
CAUTION:
Do not immerse the device into water for cleaning. Please follow the
instructions as stipulated in the chapter "Cleaning".
• Do not manipulate safety switches.
• Only process foodstuffs with this appliance.
• Misuse of the appliance for other purposes may cause injury.
Overview of the Components / Delivery Scope
Fig. A
1 Mixing vessel
2 Safety cover for mixer motor
3 Swivel arm
4 Lever for lowering / raising the arm
5 Control knob
6 Motor housing
7 Mixing bowl
8 Splash guard
9 Egg beater
10 Mixing hook
11 Hook splash guard
12 Dough hook
Fig. B: Installation of the mixing jug
13 Cap of the lid (measuring cup)
14 Lid
15 Glass carafe
16 Seal ring
17 Knife block
18 Screw-on base
38
KM3636_IM
Preparation
• Remove the appliance and all included accessories from
the box.
• In order to remove any production residue, clean all acces-
sories before initial use as described under "Cleaning".
Electrical Connection
Ensure that your mains power corresponds with the specifi-
cations on the type label.
The Kneading Machine
Installation and Operation
CAUTION:
• Never activate the lever (4) when you have attached the
mixing vessel! The mixing vessel will tip over.
• Never use the kneading machine with attached mixing
vessel.
NOTE:
A safety switch prevents operation without the cover for the
mixer motor.
18.02.16