FISCHER Sauger FVC 35 M Notice D'utilisation page 19

Read the operating manual carefully before starting to use the
vacuum cleaner. It provides important instructions for the operation,
safety, care and maintenance. Keep the operating manual in a safe
place and, in case you sell the unit, hand it on to the next owner.
The manufacturer reserves the right to carry out modifications to
the design and equipment.
Any other work not covered by this operating manual must not be
carried out.
3 Before use
When unpacking, check that the delivery is complete and that there
is no transport damage.
Before using, the operators should be provided with information,
instructions and training for the use of the vacuum cleaner and the
substances that it is to be used for, including the safe procedure for
the removal of the gathered material.
4 Indicator and operating elements
Select from the following functions and settings:
0 Vacuum cleaner is switched off
I Vacuum cleaner is running
IR Vacuum cleaner is running
AR
Automatic shaker function
Fill level indicator
Setting the suction hose diameter
FVC_35M-v2.indb 19
Ready for operation
- Plug socket current-conducting
- Plug socket current-conducting
- Automatic shaker function off
- Plug socket current-conducting
- Automatic shaker function on
- Plug socket curren-conducting
- Automatic shaker function on
- The vacuum cleaner is switched on and off via the connected electri-
cal/compressed air tool at the plug socket.
- During suction, the folding filter cassettes are cleaned alternately
when a specific negative pressure is reached, at which there is still
adequate suction air.
- When the container is full and/or there is a blockage in the suction
hose, the full indicator lights up. The vacuum cleaner also emits an
acoustic signal.
- Determine the maximum negative pressure for automatic shaking.
EN- 19
04.07.2019 07:22:19