EN
VEHICLE SETUP
Connecting the battery
Step1:open the hood.
Step2:place the battery in the battery box and connect the battery plug.
NOTE
1.If it is not in use for a long time, unplug and take off the battery to prevent battery leakage.
2.Do not open, disassemble, or attempt to repair the battery.
3.After use unplug battery from vehicle.Do not charge battery in vehicle.
OPERATING THE VEHICLE
Step 1: turn on the transmitter, the headlamp of the transmitter will flash and enter the frequency
matching mode.
Step 2: turn on the receiver switch, the headlight will flash and enter the frequency matching mode.
Step 3: when the transmitter and receiver are successful in frequency up, the front lights of the
transmitter will be on for a long time, and the front lights of the vehicle will be off.
16