Remote Control (Ir) - THEIS SMART LEVEL HV Instructions De Service

Analogue to that, slopes can be set in vertical mode.
The automatic levelling is not active during the
manual mode!!!

8. Remote Control (IR)

The Remote Control unit has an operating panel simi-
lar to the laser. Power supply is working with two Mi-
cro AAA batteries.
Each keypress will be confirmed by the LED. If not
the battery is weak. The working time is minimum 60
hours.
For changing the battery open the battery compart-
ment on reverse. Dispose of used batteries correctly
(see point 14) and ensure the correct polarity with the
new batteries (observe the symbols).
The range of the Remote Control
is with ideal requirements approx-
imately 50m.
With direct sunlight and higher
brightness the range is distinctly
less.
22