Tilt Function - THEIS SMART LEVEL HV Instructions De Service

If the arrow key is pressed continuously the
movement of the laser beam is getting faster.
If the laser comes to the limit stop, the laser
beam and the out of level indicator are blinking
fast. With the arrow Y buttons the limit stop can
be driven free.

4. TILT function

Should major height changes occur (e.g. an in-
advertent jerk of the tripod leg), a so called Tilt
function effects a shutdown of the laser beam
even within the automatic levelling range, and
this occurrence is signalled by rapid flashing of
the laser beam and the out of level indicator.
The instrument has to be readjusted and
switched on.
5. Speed
After successfully levelling the instrument starts
rotating with 600 rpm. The rotation speed can be
changed in 4 steps. Press the speed button once
and the laser stops (0 rpm). By further operating
the laser beam is rotating faster.
When the laser beam stops it can be moved with
the two step-by-step buttons. When the buttons
are pressed continuously the movement of the
laser beam goes faster.
20