BTI A-WKS BL 12V Notice Originale page 40

OBJ_BUCH-2854-002.book Page 40 Monday, November 27, 2017 1:10 PM
Grinder
Protection class
Permitted ambient
temperature
– during charging
– during operation** and
during storage
Recommended batteries
Recommended chargers
* depending on the battery pack being used
** Limited performance at temperatures <0 °C
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-3.
Typically the A-weighted noise levels of the product
are: Sound pressure level 75 dB(A); Sound power
level 86 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and un-
h
certainty K determined according to EN 60745-2-3:
Surface grinding (roughing): a
2
K=1.5 m/s .
The vibration level given in this information sheet
has been measured in accordance with a standard-
ised test given in EN 60745 and may be used to
compare one tool with another. It may be used for
a preliminary assessment of exposure.
The declared vibration emission level represents
the main applications of the tool. However if the
tool is used for different applications, with different
accessories or insertion tools or is poorly main-
tained, the vibration emission may differ. This may
significantly increase the exposure level over the
total working period.
An estimation of the level of exposure to vibration
should also take into account the times when the
tool is switched off or when it is running but not ac-
tually doing the job. This may significantly reduce
the exposure level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration such as:
maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.
Declaration of Conformity
We declare under our sole responsibility that the
product described under "Technical Data" is in
conformity with all relevant provisions of the direc-
tives 2011/65/EU, 2014/30/EU, 2006/42/EC in-
cluding their amendments and complies with the
following standards:
40 | English
EN 60745-1:2009+A11:2010,
A-WKS
EN 60745-2-3:2011+A2:2013+A11:2014+
BL 12V
A12:2014+A13:2015,
/ II
EN 55014-1:2006+A1:2009+A2:2011,
EN 55014-2:1997+A1:2001+A2:2008,
EN 50581:2012.
°C 0...+45
Technical file (2006/42/EC) at:
BTI Befestigungstechnik GmbH & Co. KG
°C –20...+50
74653 Ingelfingen
12V x.x Ah L-x
GERMANY
10.8V x.x Ah L-x
ppa. Stephan Uder
LG 12V L-x
Head of Procurement
LG 10.8V L-x
Department
BTI Befestigungstechnik GmbH & Co. KG,
Salzstraße 51, 74653 Ingelfingen, GERMANY
Ingelfingen, 02.11.2017
Assembly
2
=13.5 m/s ,
Battery Charging
h
Note: The battery supplied is partially charged. To
ensure full capacity of the battery, completely
charge the battery in the battery charger before us-
ing your power tool for the first time.
The lithium-ion battery can be charged at any time
without reducing its service life. Interrupting the
charging procedure does not damage the battery.
The lithium-ion battery is protected against deep
discharging by the "Electronic Cell Protection
(ECP)". When the battery is empty, the machine is
switched off by means of a protective circuit: The
inserted tool no longer rotates.
 Do not continue to press the On/Off switch af-
ter the machine has been automatically
switched off. The battery can be damaged.
Observe the notes for disposal.
Removing the battery (see figure A)
To remove the battery 4 press the unlocking but-
tons 5 and pull out the battery downwards. Do not
exert any force.
Battery Charge-control Indication
LED
Continuous lighting 3 x green
Continuous lighting 2 x green
Continuous lighting 1 x green
Flashing light 1 x green
Martin Mayer-Hagelstein
Director Marketing &
E-Commerce
Capacity
≥2/3
≥1/3
<1/3
Reserve
1 609 92A 44R • 27.11.17