Oceanic OCEACPM2G2V Instructions De Fonctionnement Et D'installation page 10

INSTALLATION AND PREPARATIONS FOR USE
The appliance is supplied with an installation kit including adhesive sealing material and fixing
brackets&screws are included with the appliance.
• Cut the aperture dimensions as indicated in Figure - 1. Locate the aperture on the worktop such
that after the hob is installed the following reguirements are ensured;
Min.
B
Min.
25mm
42 mm
If your appliance have five hobs ;
Neighbourhood walls
Combustible
Min.
Non-combustible
A
If your appliance have four hobs ;
Neighbourhood walls
Combustible
Non-combustible
9
A[mm] B[mm]
60 150
40 100
A[mm] B[mm]
60 150
40 50
Figure 6