Steba VT 5 Mode D'emploi page 12

Assembly:
Before every assembly or disassembly the device must be turned off!
Bulge
Space
Fig. 1
Assembly of the base and the stand
1. Insert the lower stand into the hole at the base. Tighten the stand with the 4
screws on the base (Fi. 1).
2. Afterwards, insert the upper stand to the lower one and clockwise screw tightly
(Fig. 2).
12
Lower stand
tube
Base
Screw and
plane washer
Turning in
a clockwise
direction
Fig. 2
Upper
stand
tube
Thread