Sony HT-SL5A Mode D'emploi page 15

Adjusting the speaker level
Use the remote while seated in your listening
position to adjust the level of each speaker.
POWER POWER indicator
1
Press ?/1 to turn on the amplifier.
2
Turn MASTER VOLUME on the
amplifier clockwise.
3
Turn on the power of the sub woofer.
4
Turn LEVEL on the sub woofer
clockwise (about
5
Press TEST TONE.
You will hear the test tone from each
speaker in sequence.
Front (left) t Center t Front (right) t
Surround (right) t Surround (left) t
Sub woofer
6
Adjust the level parameters so that the
level of the test tone from each speaker
sounds the same when you are in your
main listening position.
To adjust the balance and level of speakers,
press MAIN MENU repeatedly to select
LEVEL menu, move the V/v/B/b button up
or down to select the parameter you want to
adjust (page 20). Then move the V/v/B/b
button to left or right to select the setting, and
press the button to enter the selection.
7
Press TEST TONE again to turn off the
test tone.
LEVEL
position).
Tip
You can adjust the level of all speakers at the same
time. Turn MASTER VOLUME on the main unit or
press MASTER VOL +/– on the remote.
Notes
• The front balance, center level, surround level, and
sub woofer level are shown in the display during
adjustment.
• To enjoy the better sound quality, do not turn the
volume of the subwoofer too high.
GB
15