GB
Explanation of symbols
Attention!
Before beginning work, familiarise
yourself thoroughly with all the op-
erating elements, particularly with
how they function and operate. Ask
a specialist if necessary.
Attention: Remove the plug from the
socket as soon as the power lead is
damaged or cut.
The pressure washer is not suitable
for direct connection to the drinking
water supply system.
CAUTION. pressure wash-
ers can be dangerous if
they are not operated cor-
rectly! The jet must never
be directed at people,
animals, electric equipment
connected to the power
supply or against the actual
pressure washer.
Information of the acoustic power
95
level L
in dB.
WA
Electric appliances should not be dis-
posed of in the domestic garbage.
Safety class
Symbols in the manual
Warning symbols (the danger
can be explained at the place
of the exclamation mark)
with information on damage
and injury prevention.
42
II
Instruction symbols (the instruction
can be explained at the place of
the exclamation mark) with informa-
tion on preventing damage.
Help symbols with information on
improving tool handling.
General notes on safety
•
This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been giv-
en supervision or instruction concern-
ing use of the appliance by a person
responsible for their safety.
•
Children should be supervised to en-
sure that they do not play with the ap-
pliance.
•
People who are unfamiliar with the
operating instructions are not permitted
to use the equipment. The operation
of the equipment is not authorised for
people under the age of 15.
Use the equipment only on a lat, sta-
•
ble surface.
•
The transport handle is exclusively for
transporting the equipment. The equip-
ment is portable but not to be carried
during operation.
•
For your safety, it is recommended that
you wear safety glasses, safety boots
and gloves and, if necessary, ear pro-
tection.
•
In the event of a fault or defect dur-
ing operation, immediately switch off
and unplug the equipment. Then read
page 50 of the operating instructions
for possible fault causes or contact our
service centre.