Jotul C 24 Manuel D'installation page 10

english
Fig. 9
10. The door can also be adjusted upwards or downwards slightly
on the door lock side by forcing it into correct position
NB! The door cannot be fully closed when adjusting it!
4.10 Assembly/installation with easy
access behind the product.
Installation
The product is heavy! Ensure you have
help when positioning and installing
it.
If there is easy access behind the product, it can be placed directly
into the surround. When the product is in the right position, the
fuel pipe and outside duct, fan or hot air ducts can be connected.
If there is no access, or limited access, to the rear of the product
when it is in position, we recommend you first read Section 4.11
which gives examples of how to proceed.
1. Position the product in the surround so that the front part of
the product and the front part of the surround are aligned.
10
Fig. 10
A
2. Unscrew the 4 screws (Fig. 10A) below the fire grate using a
5 mm Allen key from the bag of
Fig. 11
B
A
3. Adjust the 4 leg screws (Fig. 11A) below the screws that you
just removed until the product is level. Use the 4 mm Allen
key (Fig.11B) from the bag of screws
A
screws.