Princess 509200 Mode D'emploi page 9

Setting the operating temperature
(fig. D)
• For a low temperature, set the temperature
switch (2) to the 'O' position.
• For a medium temperature, set the
temperature switch (2) to the 'I' position.
• For a high temperature, set the
temperature switch (2) to the 'II' position.
Using the cool air function
(fig. D & E)
The cool air function makes sure that the
appliance temporarily provides a cooler
airflow. The cool air function can be used for
finishing your hairstyle or for styling fragile,
damaged, over-processed or permed hair.
• Keep the cool air function button (3)
depressed to activate the cool air function
at any time.
• Release the cool air function button (3) to
deactivate the cool air function.
Tourmaline technology
Tourmaline is a semi-precious gemstone
with remarkable electrical properties, which
naturally emits the most negative ions possible
when the material is heated. The ionic
function provides ultimate shine, colour and
moisture protection for your hair. Negative ions
eliminate static electricity on the hair surface
for silky and frizz-free hair.
Tourmaline naturally emits the most infrared
heating. Infrared gently heats the hair from
within. More heat is delivered directly to the
hair shaft, so that the hair can be worked
quickly and easily. Less heat is delivered to
the hair surface, so that the hair will not be
damaged and the hair's moisture and protein
will be preserved.
Tourmaline provides the healthiest, fastest
styling for each hair type with results that last
longer.
Nano silver technology
Nano silver technology works with silver
particles measured by nanometre to capture
excellent microbial effects of silver.
Nano silver is naturally antimicrobial and
eliminates bacteria from the appliance to
create a germ-free zone to protect your health.
Silver ultra-fine particles are manufactured in
the nano silver coating. Nano silver is naturally
safe and is non-irritating.
Cleaning and maintenance
The appliance does not require any special
maintenance.
Warning!
• Before cleaning or maintenance, always
switch off the appliance and remove the
mains plug from the wall socket.
• Do not immerse the appliance in water or
any other liquids for cleaning.
• Regularly check the appliance for possible
damage.
• Use a damp cloth to clean the housing of
the appliance.
• Use a clean, dry cloth to dry the appliance.
• Always keep the airflow outlet free of
obstacles (hair, dust, etc.).
• Store the appliance in the original
packaging when not in use.
Cleaning the air intake filter (fig. F)
The air intake filter (6) must be cleaned
regularly.
• Remove the air intake filter by turning it
counterclockwise.
• If necessary, use a small brush to remove
dust and debris from the air intake filter.
• Mount the air intake filter by turning it
clockwise.
Disclaimer
Subject to change; specifications can be
changed without further notice.
9