Getting Started; Key Definitions/Functions - Calculated Industries 6020 Guide De L'utilisateur

G
ETTING
Key Definitions/Functions
[OFF/ON] – Power On/Off Switch
Turns power On or Off. Turning power Off
does not clear scales, modes or units.
[RESET]+[SUBTRACT/COUNT] – Clear All
Clears all values, including memory. Resets
all permanent settings, except clicker and
beep settings.
[OFF/ON] to turn the device off, then
[MODE] + [OFF/ON] – Software Reset
Clears all values, including memory. Resets
all permanent settings, including clicker and
beep settings.
[LOCK] – Lock Switch
Locks the mode, scale and units so they
cannot inadvertently be changed.
[SUBTRACT/COUNT] – Subtract/Count Key
Toggles measuring mode between positive
and negative direction. Increases the Count
value by one. Count function is active in the
"
COUNT
[RCL] – Recall Key
Used to recall stored values. When you
[RCL] [RCL]
press
displayed, allowing roll to continue from
this value.
S
TARTED
" mode.
, the last value rolled is
1 – User's Guide