Removal And Disposal - oventrop Regudis W-HTE Notice D'utilisation

Surface-mounted cabinet
1 2 3
Illustr. 9: Configuration of the central earthing point
(1)
Hexagon nut M5
(2)
Lock washer
(3) Washer
(4) Ring terminal
(5) Washer
(6)
Contact disc with cutting teeth
1. Connect the central earthing point (see Illustr. 8 on
page 20 (1)) to the equipotential bonding rail of
the building via a cable.
The central earthing point is located on the
right-hand side wall of the surface-mounted
cabinet (see Illustr. 8 on page 20).
2. Connect the earthing point of the door (see Illustr. 8
on page 20 (2)) to the central earthing point (1).
Illustr. 10: Central earthing point with connection to
the equipotential bonding rail of the building
and to the door of the surface-mounted
cabinet
134469780-V03.04.2019
4 5 6
7.

Removal and disposal

NOTICE
Risk of environmental pollution!
Incorrect disposal (for instance with the
standard waste) may lead to environmental
damage.
f Dispose of the packing material in an
environmentally friendly manner.
f Dispose of the components professionally.
If no return or disposal agreement has been made,
dispose of the product.
f If possible, recycle the components.
f Dispose of components, which cannot be recycled,
according to the local regulations. Disposal with the
standard waste is inadmissible.
Removal and disposal
21