Foreword; Safety Information; Technical Data; Items Supplied - Weka SC 10-T Instructions De Montage Et Mode D'emploi

SC 10 T mehrspr_neu

Foreword

The SC10-T is a high-grade, electronic sauna
controller for discerning users. One priority at the
design stage was to create a mechanically robust,
durable and attractive unit. Another was to provide
an extensive range of functional features:
infinitely variable temperature control in the range
from 50 to 125°C
maximum switching capacity of 9 kW
visualization of heating cycles by two-color status
LEDs
one-touch operation for easy instant starting
selection of switch-on time up to 12 hours in
advance by user-friendly +/- buttons
visualization of the selected switch-on time and
the amount of time already elapsed by a 12-digit
LED
separate switches for heating and lighting
electronic temperature sensor
prepared for connecting an humidity/steam
controller
The SC10-T is the basic unit of the „Classic" line of
controllers (other controllers in the line: HC10-D and
LC 4-25). The controllers are elegantly matching
units with which it is possible to increase the range of
sauna functions module by module.

Safety information

The electrical connection must be made by a
qualified electrician in accordance with VDE 0100.
It is imperative to observe the directives issued by
your local power supply company. Repairs are to be
carried out by a qualified electrician only. Risk of fatal
accidents.
Follow the installation and operating instructions at
all costs.
The cabin lamp has to be splash-proof and suitable
for temperatures of over +140°C.
13.01.2006 9:13 Uhr Seite 9

Technical data:

Voltage
Heat cycle limit
Max. light rating
Temperature cut-out
Control range
Max. switching power
Type of protection:

Items supplied

Central control unit (controller)
Cabin sensor (temperature sensor and
overtemperature cut-out)
Bag with installation materials

Installing the controller

The controller has to be mounted on the outside wall
near the heater (Fig. 1). If there are already empty
conduits in the sauna wall for installing the cables,
fasten the controller with the cable bushing over cut-
out for the empty conduit.
1
GB
3/N/PE AC 400 V 50 Hz
6 hours
300 W
+135°
+50° to +125°
9 kW
IPX 4
approx. 34 cm
9