Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
LoRaWAN 863-870 ANALOG - Guide utilisateur / User guide version V2.0.1
1. PRODUCT PRESENTATION
IMPORTANT NOTE: The LoRaWAN ANALOG can only be started with a magnet.
Description:
•
The adeunis® LoRaWAN ANALOG is a ready-to-use radio transmitter enabling any type of 0-10V or 4-20mA sensor to be converted into a
wireless communicating sensor.
•
This product meets the needs of users who need to remotely monitor data of any kind (temperature, pressure, level, humidity, CO², speed,
brightness, opening, etc.)
•
The use of the LoRaWAN protocol allows you to integrate the LoRaWAN ANALOG into any network that is already deployed.
•
Two sensors can be supported by a single LoRaWAN ANALOG transmitter.
•
The product transmits the data from the sensors either periodically or in an event-related way based on top or bottom thresholds or on
detection of a change of state on its digital inputs.
•
The configuration of the transmitter is accessible by the user via a micro-USB port, allowing in particular a choice of modes of transmis-
sion, periodicity or type of interface (0-10V or 4-20mA).
•
The LoRaWAN 863-870 ANALOG is powered by a replaceable internal battery.
IMPORTANT NOTE 1: The LoRaWAN is delivered by default with OTAA configuration, allowing the user to declare his/her product to a
LoRaWAN operator.
IMPORTANT NOTE 2: The LoRaWAN can transmit measurements from the sensors but does not feed them (except the digital version).
Composition of the package
The product is supplied in a cardboard box containing the following items:
Top casing, electronic card, casing base plate,
Cable gland, 3 gland seals, 2 CBLZ 2.2 x 19mm screws, 2 Fischer SX4 plugs,
1.1. General description
Casing base
Antenna
2 holes for passing
collars through
4 fastening holes
Rail-DIN unlocking
lever
Casing base detail
Cables outlet
packing gland
Page
FR
EN
53
of 90
Publicité
Table des Matières
