Bo Jungle B-Swinging High Chair Mode D'emploi page 8

Care & Maintenance:
- Check the product before assembly and periodically during use. Please contact the after-sales department if
any defects or malfunctions are observed.
- Frame: Wipe surface with a damp cloth or sponge, use a mild detergent and warm water to clean. Towel or
air dry.
- Seat: The seat cushion is not machine washable, do not dry clean, do not iron, do not tumble dry. Use a
clean, humid cloth to clean the seat.
Instructions for assembly
1. Open the leg tubes as shown in the picture below.
WARNING: Make sure the tubes are correctly unfolded and positioned, as this will affect the stability of the
chair.
2. Push the main tube and support tube onto the bottom tubes until you hear a clicking sound, indicating that
the tubes are fixed.
3. Insert the left and right swing tubes in the swing set as shown below until you hear a clicking sound.
4. Insert the bottom of the left and right swing tubes into the swing set, until you hear a clicking sound.