15)
Position the plugs supplied
(H: either white or black, as
preferred) to cover the holes
where the self-tapping screws
were inserted.
17)
Using a pencil, mark out
the two points where the rod
will be positioned, on the wall
and column.
16)
At this point, the brace
rod (M) needs to be positioned
between the wall and the upper
column of the fixed door.
18)
Drill a hole into the wall
using the wall bit (point A) and
into the upper column of the
fixed side (point B) using the
iron bit.
A
B
31
E
N
G