WAGNER SMART Roller Manuel De L'utilisateur page 5

3. Cleanup
Start
Before you begin cleaning:
When cleaning the Smart Roller, make sure to
use the appropriate cleaning solution for the
type of material used.
• If you used latex-based materials, use
warm, soapy water to clean the Smart
Roller.
• If you used oil-based materials, use mineral
spirits.
You will need:
• A large bucket or other container that will
hold cleaning solution.
TIP: A large laundry tub filled with warm,
soapy water is ideal for cleanup if you used
latex-based materials.
Returning excess material to material container
1 2
1. Pull plunger back to draw 2. Press the fill valve
remaining material from onto the fill tube. Push
the roller arm assembly plunger forward to return
into the tube. excess material into the
container.
Cleaning the Smart Roller
1
1. Remove fill tube from the container
lid. Install end of the fill tube into the
valve housing.
4
4. Remove the roller arm. Submerge
the head of the Smart Roller and the
fill valve and pull the plunger in and
out a minimum of 5 times.
5
3
3. Remove the spatter
guard. Press locking tab
and remove roller cover
assembly from the roller
arm.
2
2. Submerge the fill tube into the
appropriate cleaning solution
and pull the plunger in and out a
minimum of 5 times.
5
5. Clean the remaining parts (cap,
core, cover and spatter guard) by
hand using the appropriate cleaning
solution.
4
4. Remove the roller cap.
Push the roller core out
the other end. Place
spatter guard, cap, core
and cover in a bucket of
the appropriate cleaning
solution.
3
3. Remove the fill tube. Submerge the
fill valve and roller arm and pull the
plunger in and out a minimum of 5
times.
English